Mind Machine
A Mind Machine is a an opto-acoustic stimulation-device, that
produces pulsed frequencies of light and sound to synchronise wide areas of
the brain / the brain hemispheres. Most Mind-Machines come with a software that
allows to program frequency patterns and sound compositions. The following construction
plan shows how to build a Mind Machine that works with a standard PC.
The Mind Machine consists of a little interface-box that is connected to the
PC via the printer port LPT1 and a set of glasses with Light-Emitting-Diods
(LEDS). The device needs 5 Volts of power which you can get from the Joystick-Port
(Pin 1) or the Keybord-plug. The software runs under Dos (Mind1.0) and Windows
(Brainsync). The Windows-Program offers Sound-capabilities, too.
For details about brainwave-synchronization refer the help-pages of the Cool-Brainwave-Syc.
program for audio, which you can download below.
4 x R 10 kOhms 12 x LED red 4 x Trasistor BC 547B 6 m cable 4 pol 1 x plasic box 1 x sunglasses 1 x plug for printer port (25 pol) 1 x plug for joystick port (15 pol)
Screenshot taken from BRAINSYNC 1.0
When using Mind1.0 (without sounds), just listen to your favorite music or to the brainwave-synchronized samples you can generate with the Cool-sample-editing-program. Sessions from 15 to 45 min with closed eyes turn very conveniently ...
!Warning!
The use of MindMachines can cause brain-damage and disorderings.
Use at your own risk ...
Download MINDV1.0
(zip, 0.7)
Download BRAINSYNC (zip, 0.7)
Download Cool brainwave and sample-editor (zip, 0.7)